Copyright © 2019 Guizhou Zhili Chuanshan Machinery Equipment Co., Ltd. All rights reserved.
ADD：Area C, Chang'an Industrial Park, Huishui County, Guizhou Province
Small slag slag machine to reduce the consumption of wearing parts The small slag slag machine belongs to the special equipment for slag discharging operation in small wells. It works in the poor alleys in the environment all the year round. Stones, water stains and dusts will aggravate the aging of wearing parts. The wearing parts of the small slag slag machine are teeth, belts, pins, rollers, etc. The main cause of damage is the impact wear of the materials. When there are hard materials or unbreakable materials entering the machine, the loss of the wearing parts will be caused. If you want to reduce the consumption of consumables, we should pay attention to the following points. 1. Appropriately increase the wear resistance of the teeth. The teeth are generally made of manganese steel, and the wear resistance itself is strong. However, we can also weld the reinforcing plates on the side of the ribs to enhance the strength of the ribs to effectively strengthen The wear resistance and impact resistance of the teeth; 2, reduce the sharpness of the stone, broken stone, if it has a very sharp corner, it is easy to scratch the conveyor belt when entering the conveyor belt, so if you want to extend the life of the belt, then the corner of the stone Can't be too sharp; 3, reduce dust into the hydraulic parts, increase the sealing of the hydraulic system, we should filter the hydraulic oil in the tank after working for a period of time, clean the dust entering the system; 4. The operator often checks during the operation of the production process. If abnormal sound is found, it is necessary to stop the inspection, especially the pin shaft part, to avoid damage to the machine caused by the pin break.
Belt slag machine features and advantages The conveyor belt of the belt skimmer mainly includes three movement modes during operation: longitudinal transportation, lateral vibration and deviation. The effect of longitudinal transport on the belt skimmer is important in these three characteristics because it determines the overall efficiency of the belt skimmer and the service life of the belt. When the belt slag slag machine is started and braked, the tension of the conveyor belt is redistributed at the drum motor due to the superposition of different forms of tension, which causes the belt slag slag machine to not vibrate smoothly during operation. At the same time, the superposition of these tensions also makes the conveyor belt more skewed. Therefore, the quality of the conveyor belt and the installation are particularly important. When the conveyor belt is installed, mechanical tests should be carried out to ensure that the tension of the conveyor belt is balanced and installed in place to avoid the occurrence of deviation. Here are some of the main advantages of using a belt conveyor. (1) The cost is lower. Compared with the chain conveyor belt, the belt conveying method still occupies a great cost advantage, especially for some customers with tight capital, if not the mining conditions, use the belt slag machine as much as possible. (2) It is convenient to replace. Compared with the chain slag slag machine, the conveyor belt maintenance of the belt slag slag machine is very convenient. It does not require professional technicians, and the customer can replace it himself, thus saving time for the user. ; (3) Convenient procurement. In most mining machinery markets, conveyor belts can be purchased without direct shipment from manufacturers. (4) The quality of the conveyor belt can also be guaranteed. After several improvements, the quality of the belt is now greatly improved, and the life of the conveyor belt is also extended.
What should I pay attention to when using the tunnel slag machine for the first time? If you purchase a tunnel slag machine, the first time you use it, you must use it in the correct way to avoid human error and cause unnecessary trouble to production. Let us take a look at the correct operation of our company's tunnel slag slag machine to avoid unnecessary troubles caused by human error. Especially when using for the first time, it is very important that the operation process must be strictly followed. Tunnel slag machine operation rules: 1. Before use, check that the cables and connectors are in good condition and that there is no damage; if the connection lines are intact, there is no burning or loosening. 2. Check if the screws of each component are loose or loose. 3. Turn on the power, turn on the two-phase switch, and let the motor run for a while. 4. Turn on the motorized drum and let the drum motor run for five minutes. Check the roller and drum for flexible rotation and whether there is abnormal sound. 5. Check the multi-way operation valve: each joystick should be in the neutral position, the operation should be flexible, no jamming. 6. When you need to stop the brake during walking, because the driving speed is extremely slow, you can turn off the motor and stop the gear pump, so that the hydraulic system stops supplying oil and achieves the instant parking effect. If you need to stop for a long time, you need to land the shovel. , press the ground.