What should I pay attention to when using the tunnel slag machine for the first time?

If you purchase a tunnel slag machine, the first time you use it, you must use it in the correct way to avoid human error and cause unnecessary trouble to production.

 

Let us take a look at the correct operation of our company's tunnel slag slag machine to avoid unnecessary troubles caused by human error. Especially when using for the first time, it is very important that the operation process must be strictly followed. Tunnel slag machine operation rules:

 

1. Before use, check that the cables and connectors are in good condition and that there is no damage; if the connection lines are intact, there is no burning or loosening.

 

2. Check if the screws of each component are loose or loose.

 

3. Turn on the power, turn on the two-phase switch, and let the motor run for a while.

 

4. Turn on the motorized drum and let the drum motor run for five minutes. Check the roller and drum for flexible rotation and whether there is abnormal sound.

 

5. Check the multi-way operation valve: each joystick should be in the neutral position, the operation should be flexible, no jamming.

 

6. When you need to stop the brake during walking, because the driving speed is extremely slow, you can turn off the motor and stop the gear pump, so that the hydraulic system stops supplying oil and achieves the instant parking effect. If you need to stop for a long time, you need to land the shovel. , press the ground.